Tools

All4Fiber Fiber Optic Three Hole Stripper, high precision stripper with 3 different holes for stripping 1,6-3mm jacket, 900µ buffer and 250µ coating of the fibre

Miller Stripper CFS-2 Miller Dual Hole Fiber Stripper 125micron & 2-3mm jacket

Miller Stripper 1-hole Strips 250µm

Miller Stripper 3-hole Strips 250/900µm and 2-3mm jacket

Miller Ribbon Fiber Stripper, removes primary coating from 12 count ribbon fiber, factory set - requires no adjustment

Miller Stripper Zange 721, strips and cuts 20-10 AWG (.8-2.6 mm)

Miller Stripper Zange 821, strips and cuts 26-16 AWG

Miller Stripper 921, strips and cuts 20-30 AWG

Miller KS-1 Kevlar Scissor ( Carbon Molybdenum & Vanadium Steel Blade )

Ripley Miller Fiber Optic Center Feed Stripper FO-CF, the fiber is fully supported in the~stripping process of 900 micron buffer coating to 250 micron and~standard 250 micron coating to 125 micron stripping, Side mounted stripper blades provide convenient stripping of 1.6 mm to 3 mm cable jackets

Miller Kevlar Cutter (Steel Blade )

Miller 39840-2 Crimp Tool for FO Connectors with Hex. Sizes .068/.100/.137/.213/.255

Miller 39840-2 Crimp Tool for FO Connectors with Hex. Sizes .068/078/128/151/178

Miller 39840-3 Crimp Tool for FO Connectors with Hex. Sizes .068.133/162/195

Miller 39840-4 Crimp Tool for FO Connectors with Hex. Sizes .068/151/178/213

Fiber optic cable stripper,
to remove primary coating of fibre optics Ø 0.125 mm
,blade dia. 0.18 mm, hole for cable feeding 0.30 mm dia.
,adjustable length stop

Fiber optic cable stripper,
to remove primary coating of fibre optics Ø 0.230 um
,adjustable length stop

Fiber optic cable stripper,
to remove primary coating of fibre optics Ø 980/1000 um
,adjustable length stop

Fiber optic cable stripper, Removes Buffer and Jacket Without Damaging Fiber
to remove primary coating of fibre optics Ø 0.125 mm
,blade dia. 0.18 mm, hole for cable feeding 0.30 mm dia.
,adjustable length stop

Thermal Fiber optic cable stripper contains a heating element that softens removes Buffer and Jacket without damaging Fiber
to remove primary coating of fibre optics Ø 0.125 mm, less than 1lb of peak pulling
,blade dia. 0.18 mm, hole for cable feeding 0.30 mm dia.
,adjustable length stop

Micro Strip Tool Kit with 3 Blades for 125um, 140um & 230um
Fiber optic cable stripper, Removes Buffer and Jacket Without Damaging Fiber
to remove primary coating of fibre optics
,Housing: plastic, impact-resistant

IDEAL 45-162 Grey Buffer Tube Stripper (For Fiber Applications)

IDEAL 45-163 Blue Buffer Tube Stripper

IDEAL 45-164 Blue Round Cable Stripper 6,4-14,3mm

Ripley Miller FTS Fiber Tube Scorer, for buffer Tube Diameters from 1,6mm to 6mm

Miller ACS Amoured Fiber Optic Cable Slitter, 8-26mm

Miller ACS-2 Amoured Fiber Optic Cable Slitter, 4-10mm

Miller MK02 Fiber Optic Cable Slitter, 4,5-29mmmm

Miller RCS-114 Fiber Optic Cable Slitter, 4,5-29mmmm

Miller jacket slitter for loose tubes, Access fibers midspan with jacket slitter
MIL-Mid-Span Access Tool MSAT-5
Miller Mid-Span Access Tool for 1.9-3.0mm

Miller jacket slitter for loose tubes, Access fibers midspan with jacket slitter
MIL-Mid-Span Access Tool MSAT-16
Miller Mid-Span Access Tool for 1-3.0mm

Miller IET for insert and extract LC/SC/MT-RJ/MU connectors

REHAU Raucut I (1.8 to 4.2) Set is used to perform midspan on tubes, with a dimension between 1.8 mm and 4.2 mm, in fibre optic cables. To make midspan on tubes of smaller dimension the tool is supplemented with additional guide for the intended dimension.

FIS Diamond Fiber Optic Scribe

Fiber Optic Wire for connector or tool repair, 0,1mm, 8pcs./Box

Mini Fiber Optic Disposal with sliding top, Plastic,

ILSINTECH Auto Stripper is designed to strip various type of fiber optic fibers 250/900um using its heater
which adjusts heating time and temperature. It always gives customer stable operation,
high quality of stripping and productivity with its auto motor and LM guide bearing.
(Occurrence of ratio of cracks on fiber : 0%, High tension strength)

IHS 12 Ribbon Stripper is designed to strip the coating of fiber ribbon up to 12 fibers

ILSINTECH Window stripper is a high precision tool for stripping the middle of optical fiber.
With auto motor and LM guide bearing, it has been realized a high quality and productivity
without cracks on fibers. (Occurrence ratio of crack : 0%, High tensile power of fiber)

Mini Fiber Optic Disposal with sliding top small, Plastic,

Mini Fiber Optic Disposal with snap top, Plastic,

Sticker with Laser warning and "Laser!", 20x40mm, 10pcs/Pack

Sticker with Laser warning and "Attention - operating fiber - do not unplug", 60x30mm, 10pcs/Pack

E2000 Opener holds the E2000 connector open